Name: Prometheus EG Barrel 6.03mm L: 370mm for Tokyo Marui M4A1 MWS GBB
Brand: Nine Ball (Laylax)
SKU: PR-4571443139559
Price: 410.0 HKD
Availability: InStock

Prometheus EG Barrel 6.03mm L: 370mm for Tokyo Marui M4A1 MWS GBB

Nine Ball (Laylax)

Prometheus EG Barrel 6.03mm L: 370mm for Tokyo Marui M4A1 MWS GBB

PR-4571443139559

HK$410.00

The Prometheus EG Barrel 6.03mm L: 370mm for Tokyo Marui M4A1 GBB is a very high quality tight bore barrel crafted from stainless steel. Though expensive you know you'll be getting a long lasting barrel made to very high tolerances. Due to the strength and highly polished finish of the steel it is very resistant to scratches and dirt. Also its nearly impossible to bend this barrel by accident, in guns with front ends with movement a brass barrel or worse an aluminium barrel will bend as you bend the outer barrel of a gun. These are all facts which are often overlooked as players focus solely on price or how tight the bore is.

Speaking of tighter bore, this is a 6.03 bore which will increase the FPS of your gun. Some players use this as one of many tuning tools for a quick 5 - 10 FPS bump for there gun.

The hop window isn't as wide as some, so if your looking to install one of the more modern style hop numbers like a firefly or prometheus flat number system you may want to consider filling this window wider before installation, or after installation check to see if all the hop rubber is coming down correctly into the barrel. Over all a fantastic quality product.

*** Tech Note - There are Loads of different barrel lengths, its always best to remove and measure your existing barrel, you will have to do it anyway to fit the new one. Then you can work out for your self how long it needs to be, as its your personal preference should you want to run the barrel further than the manufacturer intended which on many guns is preferable all the way to the end. ***

*** Tech Note - Before installing any NEW barrel please clean it using a cleaning rod, and silicon oil ***

PDI

PDI 6.01 Precision Inner Barrel for Tokyo Marui Hi-Capa 5.1 - (6 Inch)

PDIINU-PB-2-0006

HK$380.00

Stainless made precision inner barrel for Marui Hi-Capa 5.1. Internal diameter 6.01mm, increases the shooting precision. Use this 6" barrel if you intend to install a longer IPSC style race gun slide.

T-N.T. Studio APS-X Hop-Up System with 75mm Inner Barrel for GBB

TNT

T-N.T. Studio APS-X Hop-Up System with 75mm Inner Barrel for GBB

APXINU-PB-2-0005

HK$200.00

Any GBB pistol should be reasonable when it comes to accuracy so a completely upgraded inner barrel and hop up by APS-X T-N.T APS-X Hop-Up System will actually helps push BBs past 60 metres, which is something that Marui guns always had issues with due to their low power. It'll stay accurate as the 6.03mm inner barrel and Hop Up rubber is included in the set up!

Orga Magnus 6.23mm Wide Bore Barrel for AEG (303mm)

Orga

Orga Magnus 6.23mm Wide Bore Barrel for AEG (303mm)

OGAINU-PB-1-0025

HK$430.00 HK$280.00 Save HK$150.00

The ORGA Magnus 6.23mm WideBore barrel increases accuracy and trajectory by reducing barrel friction and inner barrel bouncing. The width of the barrel ensures that hop-up spin is constant and consistent when it exits the barrel. This allows for precise, long range shooting, with 60-70 meter accuracy at under 1J.

For those players that prefer to play a marksman role; high accuracy, a scope, and semi-auto will improve your effectiveness on the field. Long barrel results with a shorter WideBore barrel will allow you to be faster and mobile while still playing the type of game you enjoy.

Precision barrels can have a tendency to clog and jam as they collect dust, dirt, and BB residue. The Magnus WideBore barrel helps prevent clogging, as well as piston and gear malfunction. As the number of high-cycle products being released by manufacturers increases, the number of users wanting high cycle weapons that are still accurate and consistent rises as well. The Magnus barrel helps high-cycle players get more out of their investment.

G&P 6.03mm Tight Bore Barrel for Tokyo Marui M4A1 MWS GBBR (330mm)

G&P

G&P 6.03mm Tight Bore Barrel for Tokyo Marui M4A1 MWS GBBR (330mm)

MWS024E

HK$350.00

The G&P 6.03mm tight bore barrel for the TM M4 MWS GBB platform is designed to give you increased accuracy and FPS.

Compatibility:

Tokyo Marui M4 MWS GBBR

Dimensions:

Length: 330mm

diameter: 6.03mm

Includes:

x1 G&P 6.03mm Tight Bore Barrel for Tokyo Marui M4A1 MWS GBBR (330mm)

x1 Hop up bucking

T-N.T. Studio APS-X Hop-Up System with 500mm Inner Barrel for AEG Series

T-N.T. Studio

T-N.T. Studio APS-X Hop-Up System with 500mm Inner Barrel for AEG Series

APXINU-PB-1-0006

HK$620.00

Stock AEGs will always have trouble pushing BBs past 30 metres, no matter the length of the inner barrel and the hop up used. The BBs will start deviating to the left and right every so often as the hop up is working do its limit. This brand new APS-X T-N.T APS-X Hop-Up System will push the barriers and have your AEG surpass its previous range by another 10 or even 20 meters. It'll stay accurate as the 6.03mm inner barrel and Hop Up rubber is included in the set up!

Nine Ball (Laylax)

Nine Ball Precision Barrel (Standard Length 112.5mm) for Tokyo Marui Hi-cap 5.1 / M1911A1

NB-4582109580752

HK$270.00

High quality 6.03mm diameter precision barrel fits Marui Hi-cap 5.1 / M1911A1.

Nine Ball 6.03mm Precision Barrels (112mm) for Tokyo Marui Hi Capa 5.1 Gold Match

PDI

Nine Ball 6.03mm Precision Barrels (112mm) for Tokyo Marui Hi Capa 5.1 Gold Match

NB-4571443139313

HK$210.00

Precision polished 6.03 tightbore inner barrel for Tokyo Marui Hi Capa 5.1 Gold Match GBB pistol. Enhances accuracy and power.

- Increases muzzle velocity
- Enhances accuracy
- For Tokyo Marui ONLY (not Umarex)

PDI 6.01 Precision Inner Barrel for Tokyo Marui Hi-Capa 5.1 (7 Inch)

PDI

PDI 6.01 Precision Inner Barrel for Tokyo Marui Hi-Capa 5.1 (7 Inch)

PDIINU-PB-2-0010

HK$430.00

Stainless made precision inner barrel for Marui Hi-Capa 5.1. Internal diameter 6.01mm, increases the shooting precision. Use this 7" barrel if you intend us install an IPSC style long slide with compensator. Longer inner barrel creates more power and increases accuracy!

PDI 01 Precision Inner Barrel for Tokyo Marui 18C GBB

PDI

PDI 01 Precision Inner Barrel for Tokyo Marui 18C GBB

PDIINU-PB-2-0037

HK$250.00

Precision tight-bore inner barrel for Tokyo Marui Model 18C gas blowback pistol. This stainless steel one-piece barrel boasts an internal diameter of 6.01mm with a margin of error equal too or less than +/- 0.002mm.

Such a drastically tight diameter can potentially afford you great accuracy but the extreme dimensional tolerance means that it is critical you use the appropriate variety of high quality BBs and you regularly clean your barrel as even the slightest grain of debris can create problems when the gap between BB and barrel is so small.

BBs do not actually touch the inner barrel but rely on the stability of riding on a cushion of air pressure as it hovers away from the inner sides of the barrel. A tighter space means a better seal and a straighter pathway but also afford much less tolerance for more irregularly sized BBs, large BBs and even the slightest bit of fouling in the barrel.

PDI Palsonite 01 Inner Barrel for Tokyo Marui Hi-CAPA 5.1 (Black)

PDI

PDI Palsonite 01 Inner Barrel for Tokyo Marui Hi-CAPA 5.1 (Black)

4560249638533-BK

HK$340.00

PDI Palsonite releases a 6.01mm inner barrel for the Hi-CAPA 5.1, with an error margin of a mere 0.002mm per barrel.

Please note that all aftermarket products may require professional installation. For increased compatibility, please use consistent aftermarket branded parts, or consult your local gunsmith.

Inner Barrel

Gift Card Promotion

SRU Helmet

Cerakote Service

Gift Card Promotion

SRU Helmet

Cerakote Service

Relocation Notice