The KRYTAC Kriss Vector AEG battery extension cap is designed to expend the battery compartment of the otherwise compact battery compartment on the Krytac Kriss Vector AEG.

Compatibility:

Krytac Kriss Vector AEG

Name

Phone number Message

ASG Steel Spring Guide w/ Bearing for CZ Scorpion EVO3A1

ASG

ASG Steel Spring Guide w/ Bearing for CZ Scorpion EVO3A1

ASG-18163

Regular price HK$160.00 Save HK$0.00

Upgraded spring guide for the EVO 3A1. This upgraded spring guide has a core of high-tension steel, making it capable of handling any power spring one could wish to install in the EVO. The outer part of the guide rod has a free rotating sleeve made in POM polymer, which protects the spring from unnecessary wear and heat build-up, as well as minimizing friction. In combination a supported pressure bearing this spring guide will handle any power level of springs installed and ensure maximum spring lifespan. It is also the easiest upgrade ever, since the spring guide on the EVO can be removed without disassembly.

Name

Phone number Message

Prometheus (Laylax)

Prometheus Non-Linear Spring MS100

PR-4582109580301

Regular price HK$90.00 Save HK$0.00

FPS test on Tokyo Marui MC51 for Prometheus Non-Liner Spring (MS100):
Spring MS100 ---------- 340 - 350 fps

Name

Phone number Message

GATE TITAN V2 NGRS Advance Set (Front Wired) for Tokyo Marui Next Generation Series

GATE

GATE TITAN V2 NGRS Advance Set (Front Wired) for Tokyo Marui Next Generation Series

TTN4-ASF

Regular price HK$1,330.00 Save HK$0.00

The GATE Titan V2 Advanced Set (front wiring) for the Tokyo Marui Next Gen is the GATE Titan that Next Gen users have been waiting for. The GATE Titan is an extremely advanced MOSFET and fire control programming unit that has taken the world by storm and it looks to take the performance of the TM Next Gen to the next level!

TITAN (drop-in mosfet) will transform your AEG into an advanced training weapon system. Gain a tactical advantage thanks to the extremely fast trigger response, with an option of adjusting the AEG for each mission with 20 functions.

TITAN gives you the option to adjust:

Trigger sensitivity

Pre-cocking boostTitan

Fire selector mode

Burst mode

Rate of fire

Low battery warning

Battery protection

Sniper delay

TITAN has no less than eight sensors!

1 gear sensor

2 selector sensors

5 trigger sensors

Thanks to the gear sensor you get:

Automatic BURST ? there is no need to set burst time. You can set burst between two and 10 shots;

Automatic PRE-COCKING ? Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;

FULL CYCLE - when the precocking is off, TITAN ensures that the gearbox always makes full cycles.

You can trust TITAN because:

Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.

It is protected against short-circuits, overheating and overloading

It protects the battery against over-discharge

It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)

It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)

Why TITAN is so special?

It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station

It has option to make firmware updates via the internet

It has innovative optical sensors instead of mechanical switches that can be prone to faults

It replicates a trigger response like in a real gun

It replaces the cut-off lever

It is compatible with DSG and SSG gears

It is compatible with most v2 gearboxes (including cnc) on the market without any modification

Name

Phone number Message

GATE TITAN V2 NGRS Basic Module (Rear Wired) for Tokyo Marui Next Generation Series

GATE

GATE TITAN V2 NGRS Basic Module (Rear Wired) for Tokyo Marui Next Generation Series

TTN4-BMR

Regular price HK$860.00 Save HK$-860.00

The GATE Titan V2 basic module (rear wiring) for the Tokyo Marui Next Gen is the GATE Titan that Next Gen users have been waiting for. The GATE Titan is an extremely advanced MOSFET and fire control programming unit that has taken the world by storm and it looks to take the performance of the TM Next Gen to the next level!

TITAN V2 is an AEG Control System for V2 gearboxes which will transform your airsoft gun into an advanced training weapon. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station app for PC and Android devices. TITAN V3 enables you to adjust the trigger sensitivity with military precision. The innovative proximity trigger sensor offers you even 250 possible sensitivity settings. Gain a tactical advantage thanks to the extremely fast trigger response and many other useful functions..

Basic Set:

The best for those who prefer simplicity but require highest quality. Economic version with limited number of functions. If you will decide to have more functions, there is always option to upgrade firmware from BASIC to ADVANCED. In order to upgrade your TITAN firmware from BASIC to ADVANCED, you need to purchase the upgrade

TITAN gives you the option to adjust:

Trigger sensitivity

Pre-cocking boost

Fire selector mode

Burst mode

Rate of fire

Low battery warning

Battery protection

Sniper delay

TITAN has no less than eight sensors!

1 gear sensor

2 selector sensors

5 trigger sensors

Thanks to the gear sensor you get:

Automatic BURST - there is no need to set burst time. You can set burst between two and 10 shots;

Automatic PRE-COCKING - Pre-cocking is fully operational in SEMI, BURST and AUTO mode and there is no need to set pre-cocking boost manually. You can easily set the pre-cocking as high, mid or low;

FULL CYCLE - when the precocking is off, TITAN ensures that the gearbox always makes full cycles.

You can trust TITAN because:

Every time you pull the trigger gearbox completes the correct cycle. The gears stop exactly where they should. The gearbox works efficiently.

It is protected against short-circuits, overheating and overloading

It protects the battery against over-discharge

It significantly improves battery life, rate of fire, spring life and gearbox reliability (when pre-cocking is off)

It is compatible with the strongest AEG replicas and batteries (ready to use with LiPo 14.8V, 5000 mAh, 60C)

Why TITAN is so special?

It has a user-friendly configuration via the Tactical Programming Card and/or GATE Control Station

It has option to make firmware updates via the internet

It has innovative optical sensors instead of mechanical switches that can be prone to faults

It replicates a trigger response like in a real gun

It replaces the cut-off lever

It is compatible with DSG and SSG gears

It is compatible with most v2 gearboxes (including cnc) on the market without any modification

Disclaimer: All aftermarket upgrade parts require necessary skill or modification to install and assemble, please consult with your airsoft technician if needed.

Name

Phone number Message

RetroArms CNC Piston 14.5 Steel Teeth for Tokyo Marui Next Generation - POM

RetroArms

RetroArms CNC Piston 14.5 Steel Teeth for Tokyo Marui Next Generation - POM

RA-7229

Regular price HK$280.00 Save HK$-280.00

This piston features a super-core hard polymer construction just like the Systema and Super Core pistons, a full rack of steel teeth, and modified rail dedicated for high power and high performance applications. With the full steel teeth and polycarbonate piston body, this piston will provide durability over pistons with polycarbonate teeth, but without the cost of weight. For use with the Tokyo Marui Next Gen system only!

Features:

Full rack of CNC Steel Teeth.

Extremely hard polycarbonate piston body.

Designed to manage high performance applications.

Bore up and standard cylinder compatible.

Bore up and standard piston head compatible.

Name

Phone number Message

Airtech Studios ARA Advanced R-Hop Arm for Prowin M4 Rotary Hop-up Chamber

Airtech Studios

Airtech Studios ARA Advanced R-Hop Arm for Prowin M4 Rotary Hop-up Chamber

RHOP-PRO-BLK

Regular price HK$78.00 Save HK$0.00

The Airtech Studios R Hop adjustment arm is specifically designed to be a high-quality upgrade part aimed to maximize the performance of your R Hop in the designated platform!

Compatibility:

Prowin M4 AEG Hop Ups

Includes:

x1 Airtech Studios ARA Advanced R-Hop Arm for Prowin M4 Rotary Hop-up Chamber

Name

Phone number Message

Airtech Studios ARA Advanced R-Hop Arm for VFC M4 Rotary Hop-up Chamber

Airtech Studios

Airtech Studios ARA Advanced R-Hop Arm for VFC M4 Rotary Hop-up Chamber

RHOP-VFC-BLK

Regular price HK$78.00 Save HK$0.00

The Airtech Studios R Hop adjustment arm is specifically designed to be a high-quality upgrade part aimed to maximize the performance of your R Hop in the designated platform!

Compatibility:

VFC M4 AEGs (Avalon Series, Virgo MK1, Sabre SD)

Includes:

x1 Airtech Studios ARA Advanced R-Hop Arm for VFC M4 Rotary Hop-up Chamber

Name

Phone number Message

Modify Accurate Metal Hop Up Chamber for Tokyo Marui M16 / M4 Series

Modify

Modify Accurate Metal Hop Up Chamber for Tokyo Marui M16 / M4 Series

HP-02-01-1.jpg

Regular price HK$190.00 Save HK$-190.00

The Modify accurate metal hop up chamber for the TM M16 / M4 is designed to work as a high quality replacement over its stock original part.

Compatibility:

Tokyo Marui M16 Series AEG

Tokyo Marui M4 Series AEG

Includes:

x1 Modify Accurate Metal Hop Up Chamber for Tokyo Marui M16 / M4 Series

Disclaimer: All aftermarket upgrade parts require necessary skill or modification to install and assemble, please consult with your airsoft technician if needed.

Name

Phone number Message

Ares

ARES G36 to M16 Magazine Adaptor

sh-36-11

Regular price HK$195.00 Save HK$-195.00

An incredibly simple but nevertheless useful conversion piece for the Ares Model 36 family of AEGs. It replaces the standard magazine well on the stock model with this alternative which allows this weapon to take AR type magazines (M4 / M16 mags).

Though there is nothing wrong with 36 mags, the advantage to switching to AR types means more options for magazines with more style, sizes, features and commonality. You can run the same magazines as your comrades that use AR weapons (and Ares Tavor AEGs as well as Masada AEGs for that matter). Compared to a normal 36 magwell, the standard magazine release is removed from the rear and one is added to the left side (similar to an AR).

It is designed for the Ares model 36 so it will install on it no problem, mag wells are very similar across model 36s of different brands but if yours is not an Ares then do check with our sales department to see if yours can take this modification.

Name

Phone number Message

AEG parts

Gift Card Promotion

SRU Helmet

Cerakote Service

Gift Card Promotion

SRU Helmet

Cerakote Service

We are relocated