Fully Licensed Pistol from Nighthawk Custom, Agency Arms, Rail Scales, and Hillbilly 223
Made From Original Blue Prints
Custom Cerakote from Hillbilly 223 Center
Metal Carry Case
Uses TM 1911 Magazines
Length - 210mm Weight - 796g Magazine Capacity - 26 Rounds Power Source - Green Gas / Propane Blowback - YES Shooting Modes - Semi Auto Hop-up - Adjustable. FPS - Approx. 260FPS
Nighthawk Custom and Agency Arms have long been two of the most iconic licensed represented by RWA and both companies make some of the finest products in their respective categories. The two real steel companies seem to be on different spectrums and the thought of seeing both of them collaborate felt like something of a dream, but dreams do come true in the form of the Nighthawk Custom and Agency Arms cross collaboration project, the Agent 1.
The Agent 1 is a cross collaboration effort namely between Nighthawk Custom and Agency Arms with additional support from Rail Scales and Hillbilly 223 Urban Cerakote Finishes. The slide work of the pistol is done by the geniuses at Agency Arms, taking the traditional shape and look of the 1911 and bringing it into the 21st century. Each serration and slide cut is crafted to give the traditional 1911 a more sleek, and aggressive look.
The frame of the pistol is crafted expertly by the gunsmiths at Nighthawk Custom. This frame is not your typical frame seen on just any other 1911, this is a custom frame specially made for the Agent 1. The frame itself is "full sized" but cut short to facilitate the shorter slide seen on the gun. This ensures the shooter has the best possible grip when holding the pistol and at the same time it can facilitate the shorter slide, much like a Glock 19X.
The grip panels are licensed by Rail Scales, a high quality, premium grip manufacturer in the United States that made the same grips for the real steel Agent 1. The importance of this is that the RWA Agent 1 features a fully licensed set of grip panels, which could potentially be the first of its kind, a fully licensed set of grips. The large dimples on the grips make gripping the pistol very comfortable and will keep your hand glued on the pistol even if they are moist.
Finally, each pistol is custom cerakoted at our Hillbilly 223 Cerakote Center, by hand. Our world class cerakote applicators are certified by Hillbilly 223 to apply the same process and color to each RWA Agent 1 as seen and done on the real steel pistol. Each RWA Agent 1 is hand coated and hand treated to ensure no two pistols are alike, making every one of them unique.
The RWA Nighthawk Custom AGENT 1 is an ultra limited edition pistol with 99 pieces being made for world wide sale. This pistol is not only designed to be an airsoft gun you can play with but also as a designer piece you can take out and enjoy. Its crafted as close to a real steel pistol as any airsoft gun can possibly be and owning 1 of 99 puts any owner in a very exclusive club!! Includes:
RWA likes nothing more than to push beyond the current bar setters and make something of even better quality and these 7.4V and 11.1V batteries will surely do the job. They can be used in airsoft aegs, RC cars and plays as well as transmitters. Make sure the compartment space is large enough for them as the dimensions are L=122mm, W=20mm, H=10mm for 7.4V and L=126mm, W=20mm, H=16mm for 11.1V.
The batteries come in forms of Small Tamiya, Large Tamiya or Mini Deans.
Always use approved charger
Never throw battery into water or keep it in a damp environment
Never charge, place dispose and warm up battery near a heater, fire or any heat source
Never connect the battery to wall plug or cigarette lighter plug inside a vehicle
Battery should be stored/shipped free of any conductive materials, including necklace, hairpin, etc.
Never throw the battery against hard surfaces or use hard/sharp object to penetrate battery.
RWA Agency Arms Trigger for Tokyo Marui Model 17 - Red
The Agency Arms trigger for Tokyo Marui Model 17 AND Umarex Glocks is the nearest thing one could get when compared with the real one. The Agency Arms trigger is a drop in replacement for your Tokyo Marui Model 17 / G series and Umarex Glock that combines the best of both worlds between a traditional trigger and a flat face trigger, it provides a flat face for quicker shots but has a curve in the end to indicate the end of the trigger.
*Fully Compatible with TM G Series Model 17 and UMAREX Glock 19,17 Gen 3 and Gen 4*
Scopes don't need to be complicated to be effective and the RWA 1 - 6 x 24 First Focal Scout Scope is an example of that. Let us first explain what is "first focal". As the magnification is increased, the apparent size of the target is increased, but the reticle appears to remain the same size; with the result being that the reticle covers less of the target when the magnification is increased. This makes aiming easier.
You can choose to either have a red or green cross-hair as it really depends on the lighting and the preference of the user but no matter which one you use, the lighting is crisp. There are 5 levels of lighting. The lowest level (1) is dimly lit and even visible in a brightly lit room. You would think that the last level (5) would be too bright but it isn't. Even in the dark, the brightness doesn't overflow and block the rest of the view.
Robust construction with quality constructed components for quick adjustments. Designed to operate in low light conditions to maximize whatever light is available, you are assured with a bright sight marker to make target acquisition fast and easy. Windage, elevation, zoom, and brightness dials all offer a large grip surface, and are all placed in convenient positions. They're also easy to work, just press and turn to dial it in, no need to remove the cap.
The view is crystal clear no matter how far you zoom. Eye relief can be an issue in most Airsoft scopes but not in this case; your eyes will easily adjust and find focus with ease with the 3.5 inches eye relief. It can also withstand the recoil of the strongest of GBBRs and will not offset the zero.